Hollow Core Door
The CDH Corporation Hollow Core door is a lightweight core flush-panel door set, typically prehung on quality steel hinges in a timber or steel frame.
Doors are available as single leaf or pair leaf, finished in a variety of facings.
The standard door set is intended for interior use in dry conditions, where impact resistance is not required. This door set is not recommended for exterior use.
If hardware is to be fixed to the door face it may require blocking in the door and so must be specified at time of order.
Leaf Type Hollow Core
Core: Polystyrene Foam (SL Grade)
Rails, Stiles: Merranti, butt-joined and stapled
Facings: Medium Density Fibreboard is standard
Thickness: This door leaf is available as 35, 37, 40, 42, or 45mm thick. Standard size is 35mm thick.
Leaf Sizes: The hollow core door is available for manufacture to any practical size to suit client requirements. Thought should be given to the facings of oversize door leafs so that there is no visible join in the face of the door.
The facings listed below are available for the Hollow Core door set
- Timber Veneers
- Bolection Panels
- Raised Panels
- Decorative Timber Mouldings
- Solid Timber (thickness up to 12mm)
- Metal Sheet, mild or stainless (0.6 – 1.0mm)
- High Pressure Laminate up to 1.5mm thick (eg: Laminex, Formica)
- Fire Rated Formica
- Laminex Decoral
There are no hardware limitations for the Hollow Core door set, however consideration should always be given to fitness for purpose.