Solid Core Door

Manufacturer: CDH Corporation

The Commercial Door Hardware Solid Core door is a flush-panel door set, typically prehung on high quality steel hinges in a timber or steel frame.

Doors are available as single leaf or pair leaf, finished in a variety of facings.

The standard door set is intended for interior use in dry conditions, however this door set is suitable for exterior use with the right leaf facing.

Solid Core door sets are suitable for commercial and moderate institutional use where some impact resistance is required.

Commercial Door Hardware Standard Commercial door sets are supplied in their natural state ready for a paint or varnish finish.

Leaf Type Solid Core

Core: Particle Board

Rails, Stiles: Merranti, butt-joined and stapled

Facings: Medium Density Fibreboard is standard

Thickness: This door leaf is available as 35, 37, 40, 42, or 45mm thick. Standard size is 35mm thick

Leaf Sizes: The solid core door is available for manufacture to any practical size to suit client requirements. Thought should be given to the facings of oversize door leafs so that there is no visible join in the face of the door.

Product Options

Leaf Facings

The facings listed below are available for the Solid Core door set

  •  Fire Rated Formica
  •  High Pressure Laminate up to 1.5mm thick (eg: Laminex, Formica)
  •  Metal Sheet, mild or stainless (0.6 – 1.0mm)
  •  Solid Timber (thickness up to 12mm)
  •  Decorative Timber Mouldings
  •  Raised Panels
  •  Bolection Panels
  •  Timber Veneers
  •  Plywood
  •  Hardboard
  •  MDF
  •  Laminex Decoral

Hardware

There are no hardware limitations for the Solid Core door set, however consideration should always be given to fitness for purpose.